INSTRUCTIONS
Mixing Instructions Autumn(TM) Herbicide must be applied with clean and properly calibrated equipment. Prior to adding Autumn(TM) Herbicide, ensure that the spray tank, filters and nozzles have been thoroughly cleaned. 1. Fill spray tank with 25% of the required volume of water, and begin agitation prior to the addition of Autumn(TM) Herbicide. 2. Continue agitation to ensure full dispersion of Autumn(TM) Herbicide. 3. If Autumn(TM) Herbicide is applied in a tank mixture with other pesticides, add Autumn(TM) Herbicide to the spray tank first and ensure it is thoroughly dispersed before adding other pesticides. 4. Continue to fill the spray tank with water to the desired volume and agitate while adding spray adjuvants and nitrogen fertilizers. 5. Continue agitation during application to ensure a uniform spray mixture. (If Autumn(TM) Herbicide is added to a partial tank of spray solution, pre-slurry with clean water prior to adding to the spray tank). If ammonium sulfate (AMS) is the nitrogen fertilizer source, it is preferred that the AMS go into the spray tank prior to Autumn(TM) Herbicide. RE-SUSPENDING WDG PRODUCTS IN SPRAY SOLUTION Like other water dispersible granules or suspension concentrates (SC's), Autumn(TM) Herbicide will settle if left standing without agitation. If the spray solution is allowed to settle for one hour or more, re-agitate the spray solution for a minimum of 10 minutes before application.

REENTRY PPE
PPE required for early entry to treated areas that is permitted under the Worker Protection Standard and that involves contact with anything that has been treated such as plants, soil or water, is coveralls over long-sleeved shirt and long pants, socks and shoes and chemical resistant gloves made of any waterproof material.

PPE
Applicators and other handlers must wear: Long-sleeved shirt and long pants and shoes plus socks. Follow manufacturer's instructions for cleaning/maintaining PPE. If no such instructions for washables, use detergent and hot water. Keep and wash PPE separately from other laundry.

TANK MIX
Tank Mixes Autumn(TM) Herbicide can be tank mixed with 2,4-D for enhanced burn down activity. Autumn(TM) Herbicide can also be tank mixed with glyphosate, Paraquat or Sencor(R). For fields to be planted to corn, Autumn(TM)Herbicide can be tank mixed with simazine. Refer to tank mix partner label for additional weeds and weed heights. COMPATIBILITY If is to be tank-mixed with other pesticides not listed specifically on this label, compatibility should be tested prior to mixing. To test for compatibility, use a small container and mix a small amount (0.5 to 1 qt) of spray, combining all ingredients in the same ratio as the anticipated use. If any indications of physical incompatibility develop (precipitation, settling, changes in color) do not use this mixture for spraying. Indications of incompatibility may occur within 5-15 minutes after mixing. Read and follow the label of each tank mix product used for precautionary statements, directions for use, geographic and other restrictions.

INSTRUCTIONS
RE-SUSPENDING WDG PRODUCTS IN SPRAY SOLUTION Like other water dispersible granules or suspension concentrates (SC's), Autumn Super 51 WDG Herbicide will settle if left standing without agitation. If the spray solution is allowed to settle for one hour or more, re-agitate the spray solution for a minimum of 10 minutes before application. COMPATIBILITY If Autumn Super 51 WDG Herbicide is to be tank-mixed with other pesticides not listed specifically on this label, compatibility should be tested prior to mixing. To test for compatibility, use a small container and mix a small amount (0.5 to 1qt) of spray, combining all ingredients in the same ratio as the anticipated use. If any indications of physical incompatibility develop (precipitation, settling, changes in color) do not use this mixture for spraying. Indications of incompatibility may occur within 5-15 minutes after mixing. Read and follow the label of each tank mix product used for precautionary statements, directions for use, geographic and other restrictions.

REENTRY PPE
Long-sleeved shirt and long pants, socks and shoes and chemical resistant gloves made of any waterproof material.

PPE
Long-sleeved shirt and long pants, chemical-resistant gloves made out of any waterproof material and shoes plus socks.

TANK MIX
Tank Mixes: Autumn Super 51 WDG Herbicide can be tank mixed with 2,4-D, glyphosate, dicamba, paraquat or metribuzin for enhanced burndown activity. For fields to be planted to corn, Autumn Super 51 WDG Herbicide can be tank mixed with simazine. Refer to tank mix partner label for additional weeds and weed heights. Mixing Instructions Autumn Super 51 WDG Herbicide must be applied with clean and properly calibrated equipment. Prior to adding Autumn Super 51 WDG Herbicide, ensure that the spray tank, filters and nozzles have been thoroughly cleaned. 1. Fill spray tank with 25% of the required volume of water, and begin agitation prior to the addition of Autumn Super 51 WDG Herbicide. 2. Continue agitation to ensure full dispersion of Autumn Super 51 WDG Herbicide. 3. If Autumn Super 51 WDG Herbicide is applied in a tank mixture with other pesticides, add Autumn Super 51 WDG Herbicide to the spray tank first and ensure it is thoroughly dispersed before adding other pesticides. 4. Continue to fill the spray tank with water to the desired volume and agitate while adding spray adjuvants and nitrogen fertilizers. 5. Continue agitation during application to ensure a uniform spray mixture. (If Autumn Super 51 WDG Herbicide is added to a partial tank of spray solution, pre-slurry Autumn Super 51 WDG Herbicide with clean water prior to adding to the spray tank). If ammonium sulfate (AMS) is the nitrogen fertilizer source, it is preferred that the AMS go into the spray tank prior to Autumn Super 51 WDG Herbicide.